Hasegawa 1/72 VF-25G Messiah

October 2, 2019 at 21:48 | Posted in 1/72 scale | Leave a comment
Tags: , , , , , ,

Introduction:
This is only my third aircraft model kit and my second Macross kit. This time it’s the VF-25G Messiah by Hasegawa. Unlike my previous Bandai VF-25s, this Hasegawa kit is an aircraft model, meaning it doesn’t transform into Batroid or Gerwalk modes.

The VF-25G is the blue colored Messiah in the Macross Frontier anime, but the whole point of this build is to custom paint it. I wanted to recreate the Ripsnorters color scheme from the VF-25 Variable Fighter Master File book:

Materials & methods:
Like most military plamo, all plastic parts are in the same color; in this case a purplish-blue hue. Unlike most Gunpla kits, some sort of planning is required to sort out the order in which to paint the various parts.
First thing to do was assemble and paint the inner part of the cockpit, including the seats and pilot. There’s an option to make it a two-seater, with Ranka Lee at the back. I opted for the single seater version.
I also decided against attaching the landing gears and instead opted to cover the landing gear bay. The kit comes with some accessories for the wings: 2 pairs of speakers, or 3×3 pairs of missiles. I chose neither and left the wing empty.
Metallic parts (thrusters, intake vents) were painted in gunmetal or burnt iron, and then masked (if necessary).
Then everything was assembled according to the manual. There’s a lot of panel lines on the model, so I made them slightly deeper by scraping them with the tip of a pin. This is to make the panel line washes more visible.
After masking the cockpit, the whole thing was primed with Mr. Surfacer 1000 sprayed from an airbrush. Then I painted some preshading lines using black paint.
The order of painting went like this:
1. Paint the nose cone in white. Mask.
2. Paint the underside with Light Gull Grey. Mask.
3. Paint the top surface with Gaianotes Blue Grey.
4. For the black & white stripes, I first airbrushed white paint over the intended surfaces. Then I laid out 2mm strips of masking tape, followed by a spray of black paint.
Other parts were painted as follows:

  • Weapon: German gray
  • Tail rudder: Black
  • Feet: Gray FS36118
  • Cockpit canopy: Smoke gray
  • Wing strobe lights: Silver, then clear red/blue enamel
  • Clear parts near the cockpit: Clear red

After painting is complete, the next steps went like this: gloss topcoat -> decals -> gloss topcoat -> panel lining -> final flat topcoat.

Results:

Some closeup shots:

And finally some photos with the Bandai VF-25s:

And a rare scene of Messiahs docking in the wild

Discussion:
It’s a nice change of pace to build an aircraft model once in a while. Most of the effort spent on this kit involved painting and masking, but it was worth it.
The overall experience was less harrowing than my previous VF-25s Bandai kit, since there’s no transformation gimmick to worry about. There still some room for improvement in my detailing skills, but overall I’m pretty happy with the final output.

Leave a Comment »

RSS feed for comments on this post.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Blog at WordPress.com.
Entries and comments feeds.

%d bloggers like this: