HGUC Geara Zulu

May 30, 2010 at 23:34 | Posted in 1/144 scale | 5 Comments
Tags: , , , , , , , ,


My first ‘real’ kit after a long while. Unlike most of my previous gunpla purchases which went straight to storage after purchase, I started with this kit a few weeks right after I got it. After shopping around for some Kotobukiya & Wave option parts and some spray cans, I went straight to building. The Geara Zulu already had plenty of WWII Germany designs & references, so I decided to give it the final touch by adding the proper decals and color scheme of a WWII German war machine.

Materials & Methods

Building was pretty uncomplicated, and the only seam lines that need fixing are at the shoulders and back part of the lower legs. I also added some detail parts and other modifications which are summarised in the following image:

For coloring, I decided to replace the light green with Dark Gray (Mr. Color 32) and the dark green parts with German Gray (Mr. Color 40). A layer of primer was sprayed on the parts before the layers of paint were sprayed on. For the joints, thrusters and yellow parts, I sprayed them with gun metal (Tamiya). The only tedious task was painting the black and white parts at the chest and wrists. If you don’t have a very sharp blade, masking these parts using Tamiya tape or any other tape would be verrry frustrating.

With painting completed, it was time to apply decals. I finally get to use some Nazi Germany decals I bought from various hobby shows. I actually spent 2 days for decalling, mainly because I was being indecisive when picking and choosing the decals. When I was finally satisfied, I went ahead and applied scratches to the decals. Why, do you ask? It’s to provide some sort of realism to the weathered look I was going for. To do that, I used my hobby blade to scratch parts of the decals. The key here is not to overdo it, and also having Mr Mark Setter definitely helps a lot. Then I sprayed a layer of gloss clear coat to protect the decals.

The last part is the weathering. For this I applied the wash method, using yellow+brown enamel paints. To simulate paint chipping, I applied bits of silver paint on the torso and hip areas. For the same effect on the limbs, I used some grey paint. All these paint chipping effect were applied using a very fine brush and a toothpick. And finally the kit was given a final spray of flat topcoat. This has to be one of my fastest builds.


These last few pics were taken with the SHCM-Pro Unicorn. Yes I realize in the anime the Zulu couldn’t even stand up to a ReZEL, let alone a Unicorn. But still I decided to make the poses of the Zulu pwning the Unicorn. This post is about the Zulu, after all.


Regarding the kit, the elbow and knee joints can only bend 90 degrees; disappointing but not unexpected. Design-wise it is very appealing (to me at least), the only gripe was the jagged eyeline (which I removed) and the relatively slim torso. I would have preferred a wider chest, but modifying that from scratch would be too troublesome. But anyway, I’m quite pleased with my results, except for the springs near the knees. That didn’t work out too well.

As for photography, my cheap tripod died out on me, so I had to resort to using flash to compensate for the lighting. I still haven’t got the hang of flash photography yet, so there’ s plenty of obvious shadows or shaded areas.

Blog at WordPress.com.
Entries and comments feeds.